Silt Clear Powders are high quality anionic polyacrylamide blends designed specifically for turnidity removal in passive water treatment. With dual benefits of wate clarification and soil stabilization, Silt Clear can tranform traditional BMPs into water treatment devices capable of removing upwards of 90% of fine silt, clays, metals and nutrients.
Primary Applications
- Water clarificationin passive treatment applications
- Remove turbidity sources such as silt, clay, metlas and nutrients
- Use in construction, mining, and other land disturbing activities
- Apply Silt Clear to rock checks, wattles, sediment retention barriers (SRBs), swales, erosion matting, and many more
Features amd Benefits
- Binds and removes suspended particles from water
- Effectively clarifies passive and intermittent stormwater flows
- Removes suspended sediment in sheet flow
- Decreases soil Erosion on moderate slopes
- Improves performance of existing BMPs
- Helps meet discharge and compliance criteria
- May be used with APS Floc Logs for supercharged clarification
Directions for Use
- Silt Clear is applied dry via hand spreader, push spreader, mechanical disk, or hand sowing
- Silt Clear is ideal for sheet flow areas, it is best to use in conjunction with mulch, matting, or other cover
- If applied to channelized flow areas, it is best to use in conjunction with wattles, rock checks, or other devices to decrease flow velocity and increase mixing
- Flor large treatment areas, Silt Clear may be applied via hydroseed or water truck. However APS 700 Series Silt Stop Powders may be better suited for soil stabilization and erosion control.
Application Rates
- A little bit of Silt Clear goes a long way! Packaged in 2.5 gallon jugs and 50 pound bags.
- Area based application rate: 0.5-1 cups of Silt Clear per 100 square feet
- Flow based applications: 5lbs Silt Clear / 100,000 gallons of water
- Repeat application every 8-12 rain events (every 2-8 weeks), or when turbidity begins to increase
Pin It
Resources